Lian Li Lancool III E-ATX tower case

Features:

Extreme Airflow Craftsmanship:
- A Fine Mesh Design Has Been Implemented On The Front, Top And Both Bottom Side Panels Of The Lancool Iii.

Upper And 2 Lower Side Panels:
- The Two Bottom Side Panels Provide Sufficient Airflow To Efficiently Cool The Gpu When The Fans Are Installed Above The Psu Shroud.

Front Panel:
- The 51% Porosity Offers A Wide Direct Entry Of Fresh Air.

Hinged-Around Panels:
- Hinged Tempered Glass Side Panels Offer An Unobstructed View Of The Interior Setup , While Bottom Cover Panels Provide Quick Access To The Power Supply And Storage Drives.
- The Two Removable 4mm Tempered Glass Panels Located On Each Side Of The Case Can Be Opened By Pulling The Front Aluminum Handle.
- The Mesh Panels Located On Either Side Of The Psu Shroud Area Can Be Removed For Cleaning When The Front Panel Is Not Attached.

Flexible Configuration:
- With A Large Interior Space , Lancool Iii Can Offer Different Cooling And Usage Scenarios.

Air-Conditioning:
- With High Airflow Standard Fans And Air Tower Clearance Of Up To 185mm, Lancool Iii Is Ideal For An Air-Cooled Build.

All-In-One Cooling:
- With A Wide Front Inlet , Lancool Iii Can Provide Great Performance For An Aio Cooling Build. The Top Fan Bracket Can Support Up To 3 X 120mm/140mm Fans And Offers Enough Thickness Clearance For An All-In-One With A 420 Radiator/Fan Combo.

Custom Water Cooling:
- With The Ability To Support 3 × 360mm Radiators Simultaneously, Lancool Iii Can Offer Custom Water Cooling Enthusiasts Plenty Of Imagination.

Spacious Cooling Stand:
- The Lancool Iii Is Optimized For Water Cooling And High-End Thermal Solutions. A Maximum Of 10 120mm Fans Or A Large 420mm Radiator Can Be Mounted In The Main Chamber.

Multi-Directional Front Fan/Radiator Support:
- The Multi-Directional Front Fan Mount Offers 4 Different Ways To Mount A Radiator Or Fans To Meet Different Cooling Needs, And Features A New Latch/Handle Mechanism To Easily Secure It In Place Without The Need For Locking Thumb Screws.

Removable Top Fan Bracket:
- The Removable Top Fan Bracket With Offset Fan Mounting Points Allows A Thicker Fan/Radiator Combination To Be Installed On Top Of The Lancool Iii By Providing Sufficient Clearance From The Ram.

Modular Psu Cage Bracket: Fan/Pump/Ssd:
- The Adjustable Modular Psu Shroud Bracket Can Accommodate 1 X 360mm Radiator, 3 X 120mm Fans, 3 X 2.5´´ Ssds, Or Pump/Reservoir Combos.

Side Multi-Use Mounting Slots:
- The Mounting Slots Next To The Base Plate Are Provided 105mm Apart (Standard 120mm Fan Mounting Points) To Allow Installation Of A Distribution Board Or Reservoir/Pump Bracket.

Large Storage Capacity:
- Multiple Storage Drive Mounting Locations Are Supported For Up To 12 X 2.5´´ Ssds Or 4 X 3.5´´ Hdds And 8 X 2.5´´ Ssds.

Unit Box:
- Adjustable 2 Drive Cages (Each For 2 X 3.5´´ Hdds Or 2 X 2.5´´ Ssds) That Can Be Individually Removed Or Adjusted.

Tool-Less Ssd Tray:
- Two Spring-Loaded Sdd Trays Located Behind The Motherboard Tray Allow For Tool-Less Drive Installation.

Side Ssd Tray:
- Side-Mounted Ssd Trays Located Inside The Right Psu Shroud Panel Can Accommodate Up To 3 X 2.5´´ Ssds Or Can Be Removed To Improve Airflow.

Integrated Cable Management:
- Since The Second Camera Located On The Right Side Is Visible, A Lot Of Attention Has Been Paid To Cable Management . Lancool Iii Features An Improved Solution To Ensure Tidy Cable Routing With Tool-Less Magnetic Cable Cover Doors And A Well-Organized Layout For Hubs And Cables.

Cable Routing Slide Cover:
- By Slightly Loosening The Two Rear Thumb Screws, The Cable Cover Can Be Adjusted To Accommodate Different Sizes Of Motherboards.

Reversible Front I/O:
- Optimized For Placing The Pc On A Desktop, The Front I/O Can Be Relocated To The Bottom Of The Chassis.

Easy Psu Installation:
- The Removable Psu Mounting Bracket Allows The Psu To Be Installed Outside Of The Chassis , Then Slide In From The Rear.

Anti-Sag Support For Gpu Perfectly Horizontal:
- A Gpu Anti-Sink Mount Is Included For Seamless Hardware Viewing Through The Tempered Glass Side Panels.


Specifications:

Design:
- Format: Eatx
- Materials: Steel, Aluminum, Tempered Glass
- Supported Motherboards: Atx, Eatx, Micro-Atx, Mini-Itx, Ssi Eeb
- Side Window: Yes
- Number Of Expansion Slots: 8
- Cpu Heatsink Maximum Height: 170mm
- Maximum Graphics Card Length: 423mm
- Integrated On/Off Switch: Yes

Storage Bays:
- Number Of Internal 3.5 Bays: 3
- Number Of 2.5 Internal Bays: 3
- Supported Hard Drive Sizes: 2.5´´, 3.5´´

Connectivity:
- Number Of Usb 3.0 Ports: Two
- Number Of Usb Type-C Ports: 1
- Audio Input: 1

Cooling:
- Maximum Side Fans: 3
- Maximum Front Fans: 3
- Supported Front Fans Diameter: 120mm, 140mm
- Maximum Top Fans: 3
- Supported Top Fan Diameters: 120mm, 140mm
- Liquid Cooling Capacity: Yes
- Compatible Rear Radiator Fan Size: 420mm
- Supported Top Radiator Fan Size: 280mm, 360mm

Weight And Measurements:
- Height: 595mm
- Width: 385mm
- Depth: 575mm

Do you know all the features of Lian li Lancool III E-ATX tower case? At techinn, we select electronics and computers items that are customized for different activities and sports. If you are looking for Components instead, take a look at our complete Tower boxes collection. All the brands we sell like Lian li are all linked to the sport or activity they represent. All of our passion brands are tested in-house by our team of electronics and computers experts!